CONSNANT 1-12kw power inverter off grid solar inverter hybrid inverter can work with solar energy, generator and AC mains. They are widely used for home appliances and office devices for long time backup.
| Battery Inverter Mode Specifications: |
| Output | Output Voltage
Waveform | Sine wave | |
Rated Output
Power(KW) | LV:1-6KW | HV:1KW-12KW |
| Power Factor | 0.9~1.0 | |
Nominal Output
Voltage(V) | LV:120Vac±10% rms | HV:230 Vac±10% rms |
Nominal Output
Frequency(Hz) | 60Hz±0.3Hz
50Hz±0.3Hz |
| | | |
| DC Voltage | Nominal DC
Input Voltage | 12VDC/24VDC/48VDC |
| DC Voltage Range | 10-15.5Vdc for 12V battery |
| 20-31.0 Vdc for 24V battery |
| 40-62.0 Vdc for 48V battery |
| Low Battery Alarm | 10.5Vdc±0.3Vdc for 12V Battery |
| 21.0 Vdc±0.6Vdc for24V Battery |
| 42.0 Vdc±1.2Vdc for 48V Battery |
Low DC
input shut-down | 10.0Vdc±0.3Vdc for 12V Battery |
| 20.0Vdc±0.6Vdc for 24V Battery |
| 40.0Vdc±1.2Vdc for 48V Battery |
| High DC input alarm&fault | 16Vdc±0.3Vdc for 12V Battery |
| 32Vdc±0.6Vdc for 24V Battery |
| 64Vdc±1.2Vdc for 48V Battery |
| High DC input recorvery | 15.5Vdc±0.3Vdc for 12V Battery |
| 31.0Vdc±0.6Vdc for 24V Battery |
| 62.0Vdc±1.2Vdc for 48V Battery |
| AC Charger | Nominal Charge Current | 20A/35A/50A/70A/90A(5satges adjustable charging current) |
| Charge Current Regulation | ±5Adc |
| Over Charge protection | Bat.V≧15.5VDC for 12V battery |
| Bat.V≧31.0VDC for 24V battery |
| Bat.V≧62.0VDC for48V battery |
| Beeps 0.5s every 1s& fault after 60S |
| Algorithm | |
| Three stage:Boost CC(Constant current stage) →Boost CV(Constant voltage stage) →Float(constant voltage stage) |
| Solar Charger | Rated Charge Current | 40A | 60A |
| Rated Charge Battery Voltage Type | 12V/24V/48V | 12V/24V |
| Max PV open Circuit array voltage | 12V for 40Vdc |
| 24V for 40Vdc |
| 48V for 110Vdc |
| Charger Mode | MPPT |
| PV Low Voltage Re-connect | PV≧Bat.V=3V |
| PV Low Voltage Disconnect | PV≦Bat.V |
| Efficiency | Efficiency | ≧97% |
| Efficiency(Battery Mode) | ≧85% |
| Efficiency(Line Mode) | >98% |
| Transfer Time | AC to DC | 20ms(Max) |
| DC to AC | 15ms(Max) |
| System parameter | Over-load Protection | 110%<load<150%, beeps 0.5s every 1s, and fault after 60s off the output,
Load>150%, beeps 0.5s every 1s, and fault after 20s. |
| Surge rating(10s) | 1:3(VA) |
| Power Saver | Load≦25W(enabled on “P/S auto” setting of Remote comtro;) |
| Protections | Low battery, over charging, overload, over temp |
| Indicatoers | LED+LCD Display |
| General Specifications | Operation Temperature Range | 0℃ to 40℃ |
| Strorage Temperature | -15℃~60℃ |
| Operation Humidity | 5% to 95%(non-condensing) |
| Audible Noise | 60dB max |
| Cooling | Forced air, Variable speed fan |
| Dimension(L*W*H) | 1-3KW: 526*423*260mm
4-6KW:530*396*190mm
7-12KW:627*416*204mm |
| Net Weight(Kg) | 1KW:21.5Kg; | 1.5KW:23.5Kg |
| 3KW:30.5Kg | 4KW:32Kg |
| 5KW:36.5Kg | 6KW:40.5Kg |
| 7KW:43.5Kg | 8KW:50Kg |
| 10KW:57.5Kg | 12KW:60Kg |
